Torkaland

Thursday, May 17, 2012

ICSE Board Exams, ICSE Board Exam Results 2012, ICSE Date Sheet 2012, ICSE Time Table

ICSE Board Exams, ICSE Board Exam Results 2012, ICSE Date Sheet 2012, ICSE Time Table: Council for the Indian School Certificate Examinations (CISCE) ICSE and ISC Examination Results 2012

Council for the Indian School Certificate Examinations (CISCE) ICSE and ISC Examination Results 2012

The result of ICSE & ISC 2012 to be declared on saturday, 19th May 2012 at 3.00 p.m. The results of the examinations of ICSE-2012 will be available through the internet. The user may log onto any one of the following websites using the specified URL to view results.

ICSE 2012 Results New

Results will be available on May 19 3.00 pm

ISC 2012 Results New

Results will be available on May 19 3.00 pm

Through SMS

* In the Message box, enter your index number in the following way:-
* If your index number is T/4331/009 then type: ICSE T4331009 or
* for ISC if your index number is B/8531/009 then type ISC B8531009
* Now send the message to get your result.

In the Send To box, enter the number- 51818, 56263, 58888, 5676750, 56388 and 54242..

The result will be displayed in the following format viz:

Anand Sharma ENG-98,HIN-87,EED-97,HCG-95,MAT-98, SCI-90,CTA-100,SUPW-A,PCA,

Helplines for Students
Sumaitri: 23389090
Snehi: 55978181
'via Blog this'

[ Read More ]

Ecosprin Tablets 75 & 150 mg | Ecosprin Side Effects | Ecosprin Dosage

– 350 comments

Ecosprin Tablets 75 & 150 mg | Ecosprin Side Effects | Ecosprin Dosage:

Ecosprin is used as an analgesic to rapidly relieve of minor to moderate aches and pains, as an antipyretic to reduce fever, and as an anti-inflammatory medication. Ecosprin belongs to a class of drugs which is known as nonsteroidal anti-inflammatory drugs (NSAIDs).

Name of Drug

Ecosprin (Sometimes Ecosprin is also referred to as: Aspirin, Ecospr, Ecotrin, Bufferin and many others).

Manufacturer of Ecosprin

USV Ltd.
Website: usvindia.com

Ecosprin Tablets 75 mg manufactured by USV Ltd.

Active pharmaceutical Ingredient in Ecosprin

The Active pharmaceutical Ingredient present in Ecosprin Tablets is acetyl salicylic acid.

What is Ecosprin Used For

Ecosprin is used as an analgesic for rapid relief of minor to moderate aches and pains, as an antipyretic to reduce fever, and as an anti-inflammatory medication.
Ecosprin is also used long-term, at low doses, to help prevent heart attacks, strokes, and blood clot formation in people at high risk for developing blood clots. It has also been established that low doses of aspirin may be given immediately after a heart attack to reduce the risk of another heart attack and stroke.
Ecosprin used for the treatment of inflammation, fever, and pain that results from many forms of arthritis, including rheumatoid arthritis, juvenile arthritis, systemic lupus erythematosus, ankylosing spondylitis, Reiter's syndrome, and osteoarthritis, as well as for soft tissue injuries, such as tendinitis and bursitis. Aspirin also is used for rapid relief of mild to moderate pain and fever in other inflammatory conditions.

Ecosprin Tablets Dosage

Ecosprin should be taken with food.
Usual doses for mild to moderate pain are 325 mg every 4 hours
Doses for rheumatoid arthritis include 325 mg every 4-6 hours
Heart attacks are prevented with 75, 150 or 325 mg daily.

Drug Class and Mechanism

Ecosprin is a non-steroidal antiinflammatory drug (NSAID) effective in treating fever, pain, and inflammation in the body. It also prevents blood clots (i.e., is antithrombotic). As a group, NSAIDs are non-narcotic relievers of mild to moderate pain of many causes, including headaches, injury, menstrual cramps, arthritis, and other musculoskeletal conditions. Other members of this class include ibuprofen (Motrin), indomethacin (Indocin), and several others. They all work by reducing the levels of prostaglandins, chemicals that are released when there is inflammation and that cause pain and fever. NSAIDs block the enzyme that makes prostaglandins (cyclooxygenase), resulting in lower concentrations of prostaglandins. As a consequence, inflammation, pain, and fever are reduced. Inhibition of prostaglandins also reduces the function of platelets and the ability of blood to clot. Ecosprininhibits the function of platelets in a manner that is different from other NSAIDs, and its antithrombotic effects last longer than other NSAIDs. This is why Ecosprinis is used for preventing heart attacks and strokes.

Missed Dose

Take the missed dose as soon as you remember. Do not take two doses at the same time.

Ecosprin Tablets - Storage

Ecosprin Tablets should be stored at room temperature, 20-25 C (68-77 F), in a sealed container, avoiding moisture

Warnings and Precautions

Ecosprin is associated with several suspected or probable interactions that affect the action of other drugs. The following examples are the most common of the suspected interactions.
NSAIDs may increase the blood levels of lithium (Eskalith) by reducing the excretion of lithium by the kidneys. Increased levels of lithium may lead to lithium toxicity.
Ecosprin may reduce the blood pressure lowering effects of blood pressure medications. This may occur because prostaglandins have a role in the regulation of blood pressure.

Ecosprin Tablets - Contraindications

Allergy:
Ecosprin is contraindicated in patients with a known allergy to class of drugs known as nonsteroidal anti-inflammatory drugs (NSAIDs), and in patients with the syndrome of asthma, rhinitis, and nasal polyps. Ecosprin may cause severe urticaria, angioedema or bronospasm(asthma)
Reye's Syndrome:
Ecosprin should not be administered to Children or teenagers for viral infections with or without fever, because of the risk of Reye's Syndrome with concomitant use of Ecosprin in certain cases.

Side Effects of Ecosprin Tablets

The main undesirable side effects of aspirin are gastrointestinal ulcers, stomach bleeding, and tinnitus, especially in higher doses. In children and adolescents, aspirin is no longer used to control flu-like symptoms or the symptoms of chickenpox or other viral illnesses, because of the risk of Reye's syndrome.
'via Blog this'

[ Read More ]

Wednesday, May 16, 2012

LG GW620 Eve/Etna - GetYourDroidOn

– 0 comments

LG GW620 Eve/Etna - GetYourDroidOn:The LG GW620 is available on Rogers Canada as the LG Eve.

It HAS been rooted and it is even possible to flash it with a custom firmware and rom.

==Boot modes:

-Safe mode. Hold menu while booting.

-Emergency mode. Hold "1" while booting.

-Bootloader/Flashboot mode. Remove the battery, connect the phone on the computer via USB, then when the screen light dim up, but is still black and there's no logo, press and maintain the space bar key of the physical keyboard (on some versions, you may have to press space bar + menu keys). Press and maintain these keys until the LG logo appears with some white text overlay on it.

==To root it:

1. Enter this (as you would type a number to call, in the Call application) on the handset to get to the hidden menu: 3845#*620# (3845#*5200# on Korean firmware)

2. Select: Module Test -> Stability Test -> Enable Root Permission

3. Newer roms require a password (case sensitive): EVE&ADAM&&620LOVE!

For more infos, see : http://www.lg-phones.org/how-to-flash-lg-eve-etna-gw620.html

==To flash it with OpenEtna/Cyanogen mod:

http://www.lg-phones.org/how-to-flash-lg-eve-etna-gw620.html

http://www.sosandroid.fr/forumAndroid/topic536.html

'via Blog this'

[ Read More ]

[LG GW620] Skip to Android 2.2 - OpenEtna V6.1RC5: LG Phones | Android SOS

– 6 comments

[LG GW620] Skip to Android 2.2 - OpenEtna V6.1RC5: LG Phones | Android SOS:

Polytheus created a firmware for the LG GW620 based on the work of Cyanogen - (Links are available to members, register ... :-)) . He therefore proposed its firmware based on Android 2.2.
This firmware is still experimental but works 99%. Note, however, happen in this version calls for serious computer skills . Scripts can greatly facilitate the set, but make sure you ALL understand before you start! Update: V6.1 RC5 integrating the package with the boot image 2.4.4 What works: - Network 3G / WiFi - GPS- Android 2.2 - JIT - Video decoding hardware - OpenGL - Installing applications on SD card - ... This is not working or partially Camera - limited to 3 megapixels - Video recording - sharing a 3G connection over Wi-Fi Solution reported by (Links are available to members, register ... :-)) on the blog. Thank you to her / him!Before you start you should know that you can break your phone if you do not follow the instructions to the letter. We assume no liability. Similarly, it is possible to go back but it's not easy (see (Links are available to members, register ... :-)) ). Returns watches a reboot of the phone is required before returning to V10cPrerequisites - The LG GW620 in an early version (V10C is ideal, see tutorial above if necessary) - V10f requires a return to V10c - The installation package attached(Links are available to members, register ... :-)) - Save all your personal data will be erased because everything - Linux or Windows (for Mac, we need to get adb and that fasboot matches your OS and adapt the scripts - see. sh). Linux scripts are provided - Know how to use the command line. Double-clicking is not good here!Method To start - It is considered that there is on Windows, and Linux users will Maceux adapt and update udev - Unzip the package in the folder c: \ gw620 it will be the basis for further work - Browse folder to go to learn all the scripts .bat / .sh , the file image that contains the fimwares, the record bin utilities, the filedrivers when needed, the folder apps that contain everything that will be pushed more on the mobile, the record camera that will find the 3G connection if concern - Backup with APNs (Links are available to members, register ... :-)) . (No need to download the package, it is included in the APN file of this package it) - Go toMenu> Settings> Applications> Development and Enable USB debugging - Connect phone via USB, if the PC application drivers, point those in c: \ gw620 \ drivers - Open the command prompt (CTRL + R then cmd and input) - Navigate to the folder gw620 with the command cd c: \ gw620 - Make sure the mobile is well recognized with the command bin \ ADB.EXE devices - If you have a response type device 80A352166040299565 , that's OK, we can continue. Otherwise, we must return to the installation of drivers - Install the phone's memory card to allow data transfer from PC - Put the file GAPPS-MDPI-20100930-signed.zip at the root of the phone's memory card. It is in the apps - Disconnect the memory card via software mobile and PC (remove the memory card from the system tray Android) phone Rooter - Skip this step if you already did - Composer on the keypad * 3845 # 620 # - Go to Module Test -> Stability Test -> Enable Root Permission - If the mobile asks for a password, enter EVE & ADAM && 620LOVE! then go out with back button - From the command prompt opened earlier, enter 0 -root-mobile.bat - Your phone sees install the necessary elements of the root - Unplug and turn off your mobile firmware OpenEtna Installation - Remove the battery power consumption - Connect the USB cable to PC - Start the mobile space by holding down (see the result on the photo below - after forummobiles.com by (Links are available to members, register ... :-)) ) - From the command prompt opened earlier, type the command bin \ fastboot.exe devices - If you have a response type device 80A352166040299565 , that's OK, we can continue. Otherwise, we must return to the installation of drivers - Enter the command that runs the flash -flash-1 mobile.bat - Wait until you get the message "End of flash" on the PC screen and "Writing system (xxxxxxxxxx bytes) - OKAY "on the mobile screen - Disconnect the USB cable - Replace the battery - Restart the phone. This can be long as the system begins to adjust to your mobile and install Google applications - Once it started, set the QWERTY keyboard inSettings-> Language & Keyboard-> Device - Restore your digital camera Your phone is now functional in version 2.2 of Android

ATTACHMENTS

'via Blog this'

[ Read More ]

Steps To Install Any ROM In LG GW620

– 1 comments

Steps To Install Any ROM In LG GW620 By Lokai:
All the steps to install any ROM.

In this guide I will try to explain all the steps to get root, install a free ROM with fastboot access, install the android SDK and install modified using fastboot versions.

Note
Fastboot is a mobile phone that allows to load a ROM customized or remove corrupt user data

Root permissions

Notice
The root mode allows us to be root which means that we can install programs that modify important files of the operating system as well as modify those same files, so it can be dangerous if you don't have the right skills. You must be careful when installing applications that they ask us such permission and only install if we can fully rely on them.

Type the following on your mobile:

Code:
3845 # * 620 #
Now browse "all In Module test" - > "stability test" - > "enable root permission"

We have enabled root mode, if asked us for a password:

Code:
EVE & ADAM & & 620LOVE!

Install free ROM with fastboot access

Information
This step is required to be able to access fastboot and to later load ROM modified's, to check if you have access to fastboot and accessing it can follow this guide LG GW620 - ToleMac Fastboot

For this step we need to download the free ROM and a few utilities:

Usefulness of flashing LG

LG Utils (to carry out the change of ROM and kdz turn cab)

ROM v10C (America)

ROM v10G (Europe)

Trick
To avoid problems, please uninstall any driver from LG that could have on the PC as well as uninstall the utilities of LG, then restart.

Unzip LG-Utils-0.4.2. zip in c:flash (if does not exist, create it)

We put the ROM downloaded into the folder c:flash

B2CAppSetup.exe install and execute. In the list of drivers select GW620.

Open a command prompt (CMD) and going to the folder created earlier.

Code:
CD c:flash
We run the KP500-Utils-EN.exe file

Trick
With Windows Vista or Windows 7 run CMD and the previous file as administrator

In the menu that appears:

"I", press enter.

We write, depending on the ROM downloaded:

Code:
(c): flashV10C_00. kdz
Code:
(c): flashV10G_00. kdz
Click enter.

Connect the mobile to the PC and wait for the drivers to be installed.

We return to the previous window.

Press "J", enter.

We write "gw620", enter.

We write, depending on the ROM downloaded:

Code:
(c): flashV10C_00. cab
Code:
(c): flashV10G_00. cab
Click enter.

We write, depending on the ROM downloaded, "v10c_00" or "v10g_00", enter.

Now the LG update software to run and flasheara our mobile.

We hope that the process reaches 100% and the phone is rebooted.

Note
This operation can last quite, be patient. In the event that it fails, completely uninstall the drivers and start again using another USB. We recommend using a USB port without extensions, which comes directly from the motherboard of the PC.

Type the following on your mobile:

Code:
3845 # * 620 #
Now browse over "factory reset" - > "factory reset"

The phone load with the values of factory and we can see if we have been successful if we are going to "Settings" - > "about phone" the new ROM should we appear in "software version".

Install and configure the Android sdk

Note
This step is necessary in order to install ROM's modified, such as the ToleROM, the zappcod 1.6, 2.1 of Polytheus or the latest 2.2 also of Polytheus

For this step we need to download Java and the own Android SDK:

Java (this page automatically install us Java on your PC).

Android SDK

Mirror Android SDK v7 (to avoid problems)

Unzip the android SDK in c:androidsdk file (check that folder appear several more, a readme and the file "sdk Setup.exe" or "SDK Manager" in the versions most recent)

Open a command prompt (CMD) and type:

Code:
set PATH = % PATH %; c:androidsdktools
Run Setup or SDK Manager c:androidsdkSDK

Us to open directly out many packages to install, it is best cancel and select them for us.
In "Available packages" select: "android sdk tools" and "usb driver package" and click "Install selected" (may we already have "android sdk tools" installed, the other package is needed in this case only).

In new versions appears in "Available packages", "third party add-ons", "Google Inc. add-ons" and finally "Google Usb Driver package".

Activate the debug in the phone mode, we have to go on the mobile phone to "Settings" - > "Applications" - > "Development" - > "USB debugging".

Connect the phone to the PC, it will ask us driver, we tell you to look in the folder "c:androidsdkusb_driver".

Notice
If does not recognize the phone, go to the folder c:androidsdkusb_driver and replace the file "android_winusb.inf" for this one: android_winusb.inf and we repeat the operation.

To check if everything worked correctly, in the CMD window type "adb devices" will appear a few commands and in the end "list of devices attached", if you see a code followed by "device", is that it has worked, if nothing appears, we must start again.

Trick
If it does not nothing after putting "adb devices", the first thing is restart your PC, restart the phone and to try again. Changing USB and see if it continues to recognize the phone and to try again. Disconnect the debug mobile mode, return to activate and to try again.

Information
In the case of LINUX, there is a method perfectly explained in this other post: install Ubuntu Linux Android SDK and 10.04 and 10.10

Installation of a modified ROM

Note
To begin with, we assume that we have access to fastboot, root permissions and the android SDK correctly configured

Download the ROM to be used. If a compressed file, the extract us and should be two files, "system.img" "boot.img".

Open a command prompt (CMD) and go to the folder where we have the ROM, for example "c:rom":

Code:
CD c:rom
Trick
With Windows Vista or Windows 7 run CMD as administrator, with Linux make sure you have root (sudo su, for example)

Mobile access to the fastboot mode.

Information
To access fastboot, turn off the phone and unplug it from the PC, remove the battery, we put the battery, open the keyboard, press the power button, wait for the screen is retroilumine (about 2 seconds) and press space. If we have done well appears us the logo of LG and above on the left is visualizaran data type:

USB Fastboot: XXXXXX
Machine ID: XXXXXX
Build date: XXXXXX
Serial number: XXXXXX (usually Unknown)

Connect the phone to the PC and console we write "fastboot devices", as follows should appear:

Code:
? fastboot
Notice
If the previous code does not appear, repeat the steps of the installation of the driver in the section of the android SDK. Do not continue until show us the code

We now come to write the ROM. In the command window type:

Code:
fastboot erase userdata
The mobile screen shows:
Code:
erasing 'userdata' - OKAY
We write
Code:
fastboot flash boot boot.img
The mobile screen shows:
Code:
writing 'boot' (warning bytes)-OKAY
We write
Code:
fastboot flash system system.img
The mobile screen shows:
Code:
writing 'system' (xxxxxxxxx bytes)-OKAY
Remove the battery and we are back to, we turn on the phone.

Note
This operation can last quite, be patient. In the event that it fails, access the fastboot mode again and run the command from the PC window "fastboot - w".

Once we choose language and configure the date and time have already loaded the ROM.

Note
Depending on the version that we have installed, you can that we have lost root access on your phone.

Thanks

Many thanks to all who have written guidelines that have served me to write this post:

nestortoledo
Install a free ROM, without personalization of Orange or another operator.
Install and configure the Android sdk
cachorrorxs
Install Android on Linux Ubuntu SDK and 10.04 and 10.10
Tolemac
[ROM] toleROM for LG GW620

'via Blog this'

[ Read More ]