[LG GW620] Skip to Android 2.2 - OpenEtna V6.1RC5: LG Phones | Android SOS

[LG GW620] Skip to Android 2.2 - OpenEtna V6.1RC5: LG Phones | Android SOS:

Polytheus created a firmware for the LG GW620 based on the work of Cyanogen - (Links are available to members, register ... :-)) . He therefore proposed its firmware based on Android 2.2. 
This firmware is still experimental but works 99%. Note, however, happen in this version calls for serious computer skills . Scripts can greatly facilitate the set, but make sure you ALL understand before you start! Update: V6.1 RC5 integrating the package with the boot image 2.4.4 What works: - Network 3G / WiFi - GPS- Android 2.2 - JIT - Video decoding hardware - OpenGL - Installing applications on SD card - ... This is not working or partially Camera - limited to 3 megapixels - Video recording - sharing a 3G connection over Wi-Fi Solution reported by (Links are available to members, register ... :-)) on the blog. Thank you to her / him!Before you start you should know that you can break your phone if you do not follow the instructions to the letter. We assume no liability. Similarly, it is possible to go back but it's not easy (see (Links are available to members, register ... :-)) ). Returns watches a reboot of the phone is required before returning to V10cPrerequisites - The LG GW620 in an early version (V10C is ideal, see tutorial above if necessary) - V10f requires a return to V10c - The installation package attached(Links are available to members, register ... :-)) - Save all your personal data will be erased because everything - Linux or Windows (for Mac, we need to get adb and that fasboot matches your OS and adapt the scripts - see. sh). Linux scripts are provided - Know how to use the command line. Double-clicking is not good here!Method To start - It is considered that there is on Windows, and Linux users will Maceux adapt and update udev - Unzip the package in the folder c: \ gw620 it will be the basis for further work - Browse folder to go to learn all the scripts .bat / .sh , the file image that contains the fimwares, the record bin utilities, the filedrivers when needed, the folder apps that contain everything that will be pushed more on the mobile, the record camera that will find the 3G connection if concern - Backup with APNs (Links are available to members, register ... :-)) . (No need to download the package, it is included in the APN file of this package it) - Go toMenu> Settings> Applications> Development and Enable USB debugging - Connect phone via USB, if the PC application drivers, point those in c: \ gw620 \ drivers - Open the command prompt (CTRL + R then cmd and input) - Navigate to the folder gw620 with the command cd c: \ gw620 - Make sure the mobile is well recognized with the command bin \ ADB.EXE devices - If you have a response type device 80A352166040299565 , that's OK, we can continue. Otherwise, we must return to the installation of drivers - Install the phone's memory card to allow data transfer from PC - Put the file GAPPS-MDPI-20100930-signed.zip at the root of the phone's memory card. It is in the apps - Disconnect the memory card via software mobile and PC (remove the memory card from the system tray Android) phone Rooter - Skip this step if you already did - Composer on the keypad * 3845 # 620 # - Go to Module Test -> Stability Test -> Enable Root Permission - If the mobile asks for a password, enter EVE & ADAM && 620LOVE! then go out with back button - From the command prompt opened earlier, enter 0 -root-mobile.bat - Your phone sees install the necessary elements of the root - Unplug and turn off your mobile firmware OpenEtna Installation - Remove the battery power consumption - Connect the USB cable to PC - Start the mobile space by holding down (see the result on the photo below - after forummobiles.com by (Links are available to members, register ... :-)) ) - From the command prompt opened earlier, type the command bin \ fastboot.exe devices - If you have a response type device 80A352166040299565 , that's OK, we can continue. Otherwise, we must return to the installation of drivers - Enter the command that runs the flash -flash-1 mobile.bat - Wait until you get the message "End of flash" on the PC screen and "Writing system (xxxxxxxxxx bytes) - OKAY "on the mobile screen - Disconnect the USB cable - Replace the battery - Restart the phone. This can be long as the system begins to adjust to your mobile and install Google applications - Once it started, set the QWERTY keyboard inSettings-> Language & Keyboard-> Device - Restore your digital camera Your phone is now functional in version 2.2 of Android

ATTACHMENTS

'via Blog this'