Sunday, April 24, 2011
The AMD Fusion™ Family of APUs
The AMD Fusion™ Family of APUs: "The AMD Fusion APU (Accelerated Processing Unit) gives software developers the power to unleash their imaginations and access new revenue opportunities by creating futuristic, visually rich applications with no-compromise performance even on the small form factor devices users want."
Friday, April 22, 2011
GW620 2 mods from the official Froyo
GW620 2 mods from the official Froyo
if some one need a mirror to download the official froyo modified and dumped
1) Official Froyo with Fastboot (N2k1 version)
folder : /official-w-fastboot
2) First Dump from the Official Froyo (N2k1)
folder : /official-dump
the password is 'openetna'
you can use this link : http://techno.mayix.net/android-froyo/
username:admin
password:admin
1) Official Froyo with Fastboot (N2k1 version)
folder : /official-w-fastboot
2) First Dump from the Official Froyo (N2k1)
folder : /official-dump
the password is 'openetna'
you can use this link : http://techno.mayix.net/android-froyo/
username:admin
password:admin
Please, check the files on the server. I have downloaded both of them but I got same 205bytes file which is actually log file. It contains this error message:
Fatal error: Allowed memory size of 94371840 bytes exhausted (tried to allocate 130754561 bytes) in /home/technoman/techno.mayix.net/android-froyo/index.php on line 2452
One more think, would it be nice to have checksum for the files? Just to be sure that the file is downloaded properly.
UPD: I found the way how to download it. After login I got the
"File Thingie • PHP File Manager © 2003-2011 Andreas Haugstrup Pedersen"
I have navigated to "official-w-fastboot" nad trying the download the file clicking on the "LG_Froyo_With_Fastboot.kdz" This way I got the 205 bytes file named "LG_Froyo_With_Fastboot.kdz" which contains the error message mentioned above.
Finally I just manually edited the address to: "http://techno.mayix.net/android-froyo/official-w-fastboot/" and there is the right file.
Fatal error: Allowed memory size of 94371840 bytes exhausted (tried to allocate 130754561 bytes) in /home/technoman/techno.mayix.net/android-froyo/index.php on line 2452
One more think, would it be nice to have checksum for the files? Just to be sure that the file is downloaded properly.
UPD: I found the way how to download it. After login I got the
"File Thingie • PHP File Manager © 2003-2011 Andreas Haugstrup Pedersen"
I have navigated to "official-w-fastboot" nad trying the download the file clicking on the "LG_Froyo_With_Fastboot.kdz" This way I got the 205 bytes file named "LG_Froyo_With_Fastboot.kdz" which contains the error message mentioned above.
Finally I just manually edited the address to: "http://techno.mayix.net/android-froyo/official-w-fastboot/" and there is the right file.
All files transfered to http://openetna.mayix.net/n2k1/
LG Oficial Froyo release Instalation Guide
LG Oficial Froyo release Instalation Guide
Ok there is a lot of people asking how to install the new version of the firmware for the KH5200 in ours GW620. I've made a succesfull installation and N2k1 suggested me to make a guide, and here it is!
***This guide is only for users that have OpenEtna previusly installed in theirs Eve, so it's suposed that you have the SDK and drivers previously installed and you can use fastboot***
***ONLY FOR WINDOWS USERS!!***
What we need?
1: The boot and system images dumped by N2k1. You can found it in his server, athttp://n2k1.hebestedt.de/Firmware/FroyoDump/index.php
2: SuperOneClick We need it if we want to use aplications that need root permisions. You can found it here: http://forum.xda-developers.com/showthread.php?t=803682
Lets start!
-In your PC, open the console (Windows XP: Start/Run 'cmd' // Windows 7: Windows Button/ Search: 'cmd') and type:
cd F:\ASDF\Programas\Android\android-sdk-windows\tools
(change F:\ASDF\Programas\Android for the path were you have installed the SDK)
-Connect your phone to the PC in fastboot mode.
-Then, we will make a wipe of the data; type:
fastboot -w
-In the tools folder of your SDK installation, unzip the fiole downloaded from the server of N2k1 (the pasword is 'oenetna')
-Now, back to the console, type:
fastboot flash boot boot.img
fastboot flash system system.img
After a liuttle time, you will see OK in both screens, the one in your phone and the one en your PC.
Unplug the phone and restart it. Wait a moment and you have the new firmware installed
TO ROOT YOUR PHONE
-Unzip SuperOneClick
-Put your phone in usb debugging mode, via "Settings/Applications/Development" check USB debugging, and conect it to the PC.
-In the unziped SuperOneClickFolder, open the SuperOneClick aplication.
-Press the 'Root' button
-That's all!
The firmware is working really fine. If you have any question, ask!
(Sorry if you found some gramatical error, i'm a spanish speaker :p)
EDIT: PLEASE, DON'T ASK ANYMORE! IT CAN BE USED WHIT FASTBOOT, SO YOU WILL NOT LOSE IT!!! AFTER INSTALL IT YOU CAN INSTALL ANY OTHER ROM POSTED AFTER IT, CAUSE YOU DON'T LOSE FASTBOOT!!
***This guide is only for users that have OpenEtna previusly installed in theirs Eve, so it's suposed that you have the SDK and drivers previously installed and you can use fastboot***
***ONLY FOR WINDOWS USERS!!***
What we need?
1: The boot and system images dumped by N2k1. You can found it in his server, athttp://n2k1.hebestedt.de/Firmware/FroyoDump/index.php
2: SuperOneClick We need it if we want to use aplications that need root permisions. You can found it here: http://forum.xda-developers.com/showthread.php?t=803682
Lets start!
-In your PC, open the console (Windows XP: Start/Run 'cmd' // Windows 7: Windows Button/ Search: 'cmd') and type:
cd F:\ASDF\Programas\Android\android-sdk-windows\tools
(change F:\ASDF\Programas\Android for the path were you have installed the SDK)
-Connect your phone to the PC in fastboot mode.
-Then, we will make a wipe of the data; type:
fastboot -w
-In the tools folder of your SDK installation, unzip the fiole downloaded from the server of N2k1 (the pasword is 'oenetna')
-Now, back to the console, type:
fastboot flash boot boot.img
fastboot flash system system.img
After a liuttle time, you will see OK in both screens, the one in your phone and the one en your PC.
Unplug the phone and restart it. Wait a moment and you have the new firmware installed
TO ROOT YOUR PHONE
-Unzip SuperOneClick
-Put your phone in usb debugging mode, via "Settings/Applications/Development" check USB debugging, and conect it to the PC.
-In the unziped SuperOneClickFolder, open the SuperOneClick aplication.
-Press the 'Root' button
-That's all!
The firmware is working really fine. If you have any question, ask!
(Sorry if you found some gramatical error, i'm a spanish speaker :p)
EDIT: PLEASE, DON'T ASK ANYMORE! IT CAN BE USED WHIT FASTBOOT, SO YOU WILL NOT LOSE IT!!! AFTER INSTALL IT YOU CAN INSTALL ANY OTHER ROM POSTED AFTER IT, CAUSE YOU DON'T LOSE FASTBOOT!!
[ROM] toleROM for LG GW620 - xda-developers
[ROM] toleROM for LG GW620 - xda-developers
a new firmware for LG GW620.
For more details visit:
http://www.jros.org/tolemac/?page_id=130&lang_view=en
For more details visit:
http://www.jros.org/tolemac/?page_id=130&lang_view=en
If you have installed V10n you can back to V10M or V10G (G is open M is Orange or other opeartor perhaps).
You must to download the firmware:
http://csmg.lgmobile.com:9002/swdata...00/V10G_00.kdz
The updater util:
http://csmg.lgmobile.com:9002/client...2CAppSetup.exe
And the LG utils:
http://www.assembla.com/spaces/ks360...tils-0.4.2.zip
Then:
1) Install BC2APPSetup.eze
2) Plug in your device (not in debug mode Settings-Applications-Development-debug mode)
3) Execute KP500-Utils-EN.exe
4) Enter I
5) Write the path to the V10G_00.kdz
6) Enter J
7) Enter GW620
8) Enter path to V10G_00.cab file.
9) Enter V10G_00
10) Then the LG Updater is open and trying to flash your phone with the selected firmware.
11) Enter in your phone and make factory reset (3845#*620# -> Factory Reset -> Factory Reset)
Then you can flash my ROM.
You must to download the firmware:
http://csmg.lgmobile.com:9002/swdata...00/V10G_00.kdz
The updater util:
http://csmg.lgmobile.com:9002/client...2CAppSetup.exe
And the LG utils:
http://www.assembla.com/spaces/ks360...tils-0.4.2.zip
Then:
1) Install BC2APPSetup.eze
2) Plug in your device (not in debug mode Settings-Applications-Development-debug mode)
3) Execute KP500-Utils-EN.exe
4) Enter I
5) Write the path to the V10G_00.kdz
6) Enter J
7) Enter GW620
8) Enter path to V10G_00.cab file.
9) Enter V10G_00
10) Then the LG Updater is open and trying to flash your phone with the selected firmware.
11) Enter in your phone and make factory reset (3845#*620# -> Factory Reset -> Factory Reset)
Then you can flash my ROM.
Flashing Guide - Android - XDA-Developers
Flashing Guide - Android - XDA-Developers
Android Flashing Guide
Prerequisites
To Flash a ROM for your Android device you first need to meet the following prerequisites:
- An Android smartphone that has a custom recovery installed (Amon_RA, ClockworkMod, Etc.)
- A custom ROM that was developed or ported for your device.
- A MicroSD Card to hold the ROM file temporarily.
ROM Flashing
- Obtain a ROM of your choice, many can be found in your devices development forum on XDA Forums or a alternate android development site.
- Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
- Power off the device and then boot up to recovery, it is different per device. If you are unsure how to boot up to your Android device's recovery menu then look it up in the forums or other tutorials on your device.
- In your phone's custom recovery bootloader, locate the menu options which allow you to wipe the phone. Whenever changing roms it is a good idea to make a Nandroid or BART backup first, then wipe Data/Factory and Dalvik-Cache before flashing the new rom.
- Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
- Locate the ROM .Zip file you wish to flash.
- Confirm the flash by following the on-screen instructions (ie: pressing the trackball, pressing the call button, etc.)
- If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
RUU Flashing
- Connect your Android device to your computer, Most RUU's are .exe files which will only run in Microsoft Windows natively or in Linux/Mac OS X via Wine
- Download the RUU for your device, some can be found here at PCD Phones
- Run the RUU with your phone plugged in to your computer via its USB cable.
- Follow the RUU's instructions for flashing.
- Unless errors arise your device is now flashed.
App Installs/ROM Feature Installs via Flashing
Some Roms have added features that are available to flash.
- To Flash the App/Rom Feature you must first download the .zip file.
- Mount your devices SD card and copy the .zip file over.
- Boot up to your devices custom recovery.
- Wipe your Dalvik-Cache in the Wipe Menu. And then go back to the recovery's main menu.
- This step may vary per device, there should be an option that says "Flash .zip from SD Card", select it.
- Select the .zip file you wish to flash.
- Confirm flashing of .zip file.
- Wait for the file to flash; and if successful, reboot.
Android Flashing Guide (with fastboot)
Prerequisites
To Flash a ROM for your Android device with fastboot you must have an unlocked bootloader or an engineering bootloader, these can be found across the internet. Supported devices are listed below:
- Android Dev Phone 1
- Google I/O Device
- Nexus One
- Nexus S
Unlocking your bootloader
The ADP1 and Google I/O Device do not require unlocking, however the new Nexus Devices do.
- Nexus One (cannot be relocked).
- fastboot oem unlock
- Accept/Decline warning on your devices screen.
- Nexus S (can be unlocked and relocked).
- fastboot oem unlock
- Accept/Decline warning on your devices screen.
- To relock the bootloader issue the following command:
- fastboot oem lock
ROM Flashing
- Obtain a ROM of your choice, and note the location on your computer.
- reboot your device into fastboot mode via one of the following options.
- adb reboot bootloader (requires USB debugging to be turned on).
- power off the device then back on with 'vol up' + power button.
- Wipe your device.
- fastboot -w
- Update your ROM.
- fastboot update
- Your phone will update and automatically reboot into the new ROM.
LG GW620 – Fastboot | tolemaC
LG GW620 – Fastboot | tolemaC
LG GW620 – Fastboot
Kindly, Metal_heaD , made an English translation of this post, Thank you Metal_heaD!!
In fastboot mode you can flash an Android device. Is very useful to intall new firmware or to delete user data on the device.
To enter in Fastboot mode in a LG GW620 (EVE), follow this steps:
- Turn off the device and unplug it from PC.
- Remove the battery
- Replace the battery
- Open the keyboard
- Press the ON button
- Wait until the screen is backlit, usually wait 2 seconds
- Press the space key
LG is working to dificulting the access to fastmode. If you can’t access with these steps you can visit this site LG EVE/GW620 Wiki and view other methods.
If everything is OK, you should see the LG logo with black backgorund and the letters “www.lgmobile.com” in the middle of the screen and top left is displayed a few details:
- USB fastboot XXXXXX
- Machine ID: XXXXXX
- Build date: XXXXXX
- Serial number: XXXXXX (Unknown normally)
If you don’t get into that mode, maybe you don’t make well, repeat the steps.
In other places you can read you need to have the power buton pressed, at the same time you need to have the space key pressed… is also valid.
There is much fear when we need to flash the device, but I think flashing the boot, system and userdata partitions there is no way to break the phone forever (bricking it). The most that could happens is to lose your phone data, but we can always recover the device by installing a new firmware.
Common utilities in fastboot mode:
** To perform fastboot actions, is essential to have the Android SDK installed**
- Installing a new firmware.
LG distributes firmwares in its own format, which have not yet deciphered, and the truth, I don’t care, but usually ANDROID distributes the firmware in image format ready for flashing. Normally, an Android ROM is often composed of several files whit the .Img extension, each of them must be flashed into the corresponding site.
For example, a ROM can contain this 2 files: Boot.img and system.img. Then, to intall this ROM (having the Android SDK installed), you need simply to enter in fastboot mode an execute this commands:
fastboot flash boot boot.img
fastboot flash system system.img
After that, you can remove the battery, replace it again and turn on the device (warning, it may take 1 or 2 minutes to boot, be patient).
- Erasing the user data.
I’ve seen cases where the phone has been hung to a user on the Android logo. In this case it was helpful to remove user data, entering in fastboot mode an executing this command:
fastboot erase userdata
This command will erase “ALL” data stored in the phone, Use that only as a last resort.
- Recovering a failed update:
When LG Updater updates your phone, it rewrites the system and boot partitions, if this process is interrupted, the recorded data in phone may be incomplete or corrupt.
Don’t enter in “Panic Mode”!, you still can enter in fastboot mode and repeat the update as you can see in “Installing a new firmware”.
Once you have the new firmware installed, is your choice to keep this update or to update again with LG Updater.
As you can see the GW620 bricking is difficult!
Happy flashing 
Thursday, April 21, 2011
CyanogenMod
http://goo-inside.me/google-apps/
If you are accessing the page via goo-inside.me/google-apps please update your bookmarks and links to goo-inside.me/gapps
Please see the CyanogenMod Wiki for more information.
Looking for cheap, fast, anonymizing, Goo-approved VPN service?
Check out PrivateInternetAccess! Super-affordable rates, multiple protocols, unmetered bandwidth, and more!
You can use this table to figure out what DPI you need for your device.
If you are accessing the page via goo-inside.me/google-apps please update your bookmarks and links to goo-inside.me/gapps
Please see the CyanogenMod Wiki for more information.
Looking for cheap, fast, anonymizing, Goo-approved VPN service?
Check out PrivateInternetAccess! Super-affordable rates, multiple protocols, unmetered bandwidth, and more!
Index of /google-apps/
| Name | Last Modified | Size | Type |
|---|---|---|---|
| Parent Directory/ | - | Directory | |
| latest/ | 2011-Apr-10 22:35:23 | - | Directory |
| DRC83_base_defanged.zip | 2009-Dec-04 07:59:11 | 34.3M | application/zip |
| DRC83_base_defanged.zip.md5sum.txt | 2011-Apr-10 22:39:12 | 0.1K | text/plain |
| gapps-ds-ERE36B-signed.zip | 2010-Apr-28 21:38:51 | 10.3M | application/zip |
| gapps-ds-ERE36B-signed.zip.md5sum.txt | 2011-Apr-10 22:39:12 | 0.1K | text/plain |
| gapps-gb-20110114-signed.zip | 2011-Jan-14 18:40:57 | 4.4M | application/zip |
| gapps-gb-20110114-signed.zip.md5sum.txt | 2011-Apr-10 22:39:12 | 0.1K | text/plain |
| gapps-gb-20110115-signed.zip | 2011-Jan-15 20:44:36 | 4.4M | application/zip |
| gapps-gb-20110115-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-gb-20110120-signed.zip | 2011-Mar-09 14:01:19 | 4.4M | application/zip |
| gapps-gb-20110120-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-gb-20110307-signed.zip | 2011-Mar-06 21:10:06 | 5.5M | application/zip |
| gapps-gb-20110307-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-gb-tegra-20110113-signed.zip | 2011-Jan-13 17:33:22 | 5.2M | application/zip |
| gapps-gb-tegra-20110113-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-gb-tegra-20110118-signed.zip | 2011-Jan-19 11:06:43 | 5.0M | application/zip |
| gapps-gb-tegra-20110118-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-hdpi-20100817-signed.zip | 2010-Sep-17 09:55:10 | 16.8M | application/zip |
| gapps-hdpi-20100817-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-hdpi-20100917-signed.zip | 2010-Sep-17 09:54:49 | 16.9M | application/zip |
| gapps-hdpi-20100917-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-hdpi-20100926-signed.zip | 2010-Sep-26 22:01:58 | 17.3M | application/zip |
| gapps-hdpi-20100926-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-hdpi-20100930-signed.zip | 2010-Oct-01 17:41:44 | 17.3M | application/zip |
| gapps-hdpi-20100930-signed.zip.md5sum.txt | 2011-Apr-10 22:39:13 | 0.1K | text/plain |
| gapps-hdpi-20101020-signed.zip | 2010-Oct-21 06:41:23 | 34.1M | application/zip |
| gapps-hdpi-20101020-signed.zip.md5sum.txt | 2011-Apr-10 22:39:14 | 0.1K | text/plain |
| gapps-hdpi-20101025-signed.zip | 2010-Oct-25 21:22:44 | 17.2M | application/zip |
| gapps-hdpi-20101025-signed.zip.md5sum.txt | 2011-Apr-10 22:39:14 | 0.1K | text/plain |
| gapps-hdpi-20101114-signed.zip | 2010-Nov-15 11:22:43 | 18.0M | application/zip |
| gapps-hdpi-20101114-signed.zip.md5sum.txt | 2011-Apr-10 22:39:14 | 0.1K | text/plain |
| gapps-mdpi-20100816-signed.zip | 2010-Sep-17 09:55:21 | 17.7M | application/zip |
| gapps-mdpi-20100816-signed.zip.md5sum.txt | 2011-Apr-10 22:39:14 | 0.1K | text/plain |
| gapps-mdpi-20100917-signed.zip | 2010-Sep-17 09:55:31 | 17.0M | application/zip |
| gapps-mdpi-20100917-signed.zip.md5sum.txt | 2011-Apr-10 22:39:14 | 0.1K | text/plain |
| gapps-mdpi-20100926-signed.zip | 2010-Sep-27 11:07:19 | 17.4M | application/zip |
| gapps-mdpi-20100926-signed.zip.md5sum.txt | 2011-Apr-10 22:39:14 | 0.1K | text/plain |
| gapps-mdpi-20100930-signed.zip | 2010-Oct-01 17:41:25 | 17.4M | application/zip |
| gapps-mdpi-20100930-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-mdpi-20101020-signed.zip | 2010-Oct-21 06:41:30 | 16.7M | application/zip |
| gapps-mdpi-20101020-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-mdpi-20110301-signed.zip | 2011-Mar-01 19:41:56 | 16.0M | application/zip |
| gapps-mdpi-20110301-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-mdpi-tegra-20101020-signed.zip | 2010-Dec-03 15:45:27 | 16.7M | application/zip |
| gapps-mdpi-tegra-20101020-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-mdpi-tiny-20100816-signed.zip | 2010-Sep-17 09:55:36 | 8.7M | application/zip |
| gapps-mdpi-tiny-20100816-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-mdpi-tiny-20100917-signed.zip | 2010-Sep-17 09:55:51 | 7.2M | application/zip |
| gapps-mdpi-tiny-20100917-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-mdpi-tiny-20100926-signed.zip | 2010-Sep-27 11:07:35 | 7.6M | application/zip |
| gapps-mdpi-tiny-20100926-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-mdpi-tiny-20100930-signed.zip | 2010-Oct-01 17:42:07 | 7.6M | application/zip |
| gapps-mdpi-tiny-20100930-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-mdpi-tiny-20101020-signed.zip | 2010-Oct-21 06:41:38 | 7.4M | application/zip |
| gapps-mdpi-tiny-20101020-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-passion-EPE54B-signed.zip | 2010-Sep-01 12:41:15 | 14.9M | application/zip |
| gapps-passion-EPE54B-signed.zip.md5sum.txt | 2011-Apr-10 22:39:15 | 0.1K | text/plain |
| gapps-passion-EPF30-signed.zip | 2010-Jun-19 12:33:02 | 19.1M | application/zip |
| gapps-passion-EPF30-signed.zip.md5sum.txt | 2011-Apr-10 22:39:16 | 0.1K | text/plain |
You can use this table to figure out what DPI you need for your device.
toleROM for LG GW620
http://www.jros.org/tolemac/?page_id=130&lang_view=en
DESCRIPTION AND DETAILS:
At the first hand: “my english is very poor, I’m sorry”
Based on LG Open Firmware V10G_00
Includes:
- Google application package (Gmail, Youtube, Gtalk …)
- Prerooted with Superuser Whitelist
- Busybox installed
- Terminfo
- Nano for Android
- BetterKeyboard (Additional touch QWERTY keyboard)
- Terminal emulator
- Advanced task manager
- ApnDroid
- Weather Widgets
- xyFlash
- toleSetup – Custom application to configure some ROM features.
- Complete list of APNs by Super@tmel. All APN from several operators of several countries.
INSTALATION INSTRUCCTIONS:
You must have Android SDK installed.
I have noticied about somebody don´t have access to fastboot after install V10N or V10I firmware from LG. I ‘m not sure, but I recommend to have installed V10G_00 version.
Step to step:
- Enter on hidden menu to make Factory reset – 3845#*620# -> Factory reset — (This step can be not necessary but I recommend it)
- Extract the battery when the phone is power off.
- Enter in Fastboot mode. Tuto: LG GW620 – Fastboot | tolemaC
- Open a command line console. If you use Linux be sure to have root permissions.
- Change dir to the uncompressed ROM files.
- Execute this commnad “fastboot devices”. You must see something as “? fastboot”, an interrogation and “fastboot” word. If you don´t see it you have to stop, you haven’t the phone connected to the PC. You can see this tuto: Conectando el GW620 al PC | tolemaC
- Flash your phone executing this commands:
- fastboot erase userdata
- fastboot flash boot boot.img
- fastboot flash system system.img
- You must to see this in the phone screen:
- erasing ‘userdata’ – OKAY
- writing ‘boot’ (7208960 bytes) – OKAY
- writing ‘system’ (201527040 bytes) – OKAY
- Extract the battery and put it again.
- Turn on the phone.
- Wait!, be patient. The first time the process is slow.
- Chose language and configure the time and date.
- Enter on system and enter in hidden menu: 3845#*620#
- Activate the root mode: Module test -> Stability test -> Enable Root Permission
- If ask for password see this article: EVE Adam 620Love
- Restart the device.
- Enable debug mode. Settings -> Applications -> Development -> Debug mode
- From command line console execute installData.bat, this process will install extra applications in your phone.
- Enjoy it.
DETAILS OF TOLESETUP:
toleROM Setup, or toleSetup, is an application for configure some ROM features.
These are his options:
- Market hack – Activate paid applications for operators without contract with google. Very useful for virtual operators.
- Apps2SD – You can store ALL your applications in SD if you have ext2 partition.
- Installed Applications – Application2SD – With this options you can decide what applications are stored in SD and whats are stored in phone.
- toleBackup – A nandroid variant. With this option you can save a entire backup of your device in your SD, you can recovery it after system crash.
- tolePart – tolePart can be used to create a extra partition in your SDCard and be used with Apps2SD.
DOWNLOAD:
toleROM for LG GW620
http://www.jros.org/tolemac/?page_id=130&lang_view=en
DESCRIPTION AND DETAILS:
At the first hand: “my english is very poor, I’m sorry”
Based on LG Open Firmware V10G_00
Includes:
- Google application package (Gmail, Youtube, Gtalk …)
- Prerooted with Superuser Whitelist
- Busybox installed
- Terminfo
- Nano for Android
- BetterKeyboard (Additional touch QWERTY keyboard)
- Terminal emulator
- Advanced task manager
- ApnDroid
- Weather Widgets
- xyFlash
- toleSetup – Custom application to configure some ROM features.
- Complete list of APNs by Super@tmel. All APN from several operators of several countries.
INSTALATION INSTRUCCTIONS:
You must have Android SDK installed.
I have noticied about somebody don´t have access to fastboot after install V10N or V10I firmware from LG. I ‘m not sure, but I recommend to have installed V10G_00 version.
Step to step:
- Enter on hidden menu to make Factory reset – 3845#*620# -> Factory reset — (This step can be not necessary but I recommend it)
- Extract the battery when the phone is power off.
- Enter in Fastboot mode. Tuto: LG GW620 – Fastboot | tolemaC
- Open a command line console. If you use Linux be sure to have root permissions.
- Change dir to the uncompressed ROM files.
- Execute this commnad “fastboot devices”. You must see something as “? fastboot”, an interrogation and “fastboot” word. If you don´t see it you have to stop, you haven’t the phone connected to the PC. You can see this tuto: Conectando el GW620 al PC | tolemaC
- Flash your phone executing this commands:
- fastboot erase userdata
- fastboot flash boot boot.img
- fastboot flash system system.img
- You must to see this in the phone screen:
- erasing ‘userdata’ – OKAY
- writing ‘boot’ (7208960 bytes) – OKAY
- writing ‘system’ (201527040 bytes) – OKAY
- Extract the battery and put it again.
- Turn on the phone.
- Wait!, be patient. The first time the process is slow.
- Chose language and configure the time and date.
- Enter on system and enter in hidden menu: 3845#*620#
- Activate the root mode: Module test -> Stability test -> Enable Root Permission
- If ask for password see this article: EVE Adam 620Love
- Restart the device.
- Enable debug mode. Settings -> Applications -> Development -> Debug mode
- From command line console execute installData.bat, this process will install extra applications in your phone.
- Enjoy it.
DETAILS OF TOLESETUP:
toleROM Setup, or toleSetup, is an application for configure some ROM features.
These are his options:
- Market hack – Activate paid applications for operators without contract with google. Very useful for virtual operators.
- Apps2SD – You can store ALL your applications in SD if you have ext2 partition.
- Installed Applications – Application2SD – With this options you can decide what applications are stored in SD and whats are stored in phone.
- toleBackup – A nandroid variant. With this option you can save a entire backup of your device in your SD, you can recovery it after system crash.
- tolePart – tolePart can be used to create a extra partition in your SDCard and be used with Apps2SD.
DOWNLOAD:
Openetna Android Roms
http://openetna.com/openetna/
Great news !
System v6.2-rc1 and boot 3.0 has been released.
Installation guide can be found here : http://wiki.openetna.com/w/Installation:Windows_(Automated)
Download files can be found here : http://code.google.com/p/openetna/downloads/list
Also, please head over to : http://forum.openetna.com/ if you have any questions. You’re more likely to get an answer there than here.
system v6.2-rc1/boot v3.0
- Needs new google apps file “gapps-mdpi-20101020-signed.zip” to be put on your sdcard
- Using lg’s proprietary libs from their froyo release
- New Brightness sensor
- Camera is working again
- Using modified 2.6.32 kernel from lg’s froyo release
